Easi-Set Concrete Buildings: Benefits

The industry leader in transportable concrete buildings provides greater weather-tightness and impact resistance through the patented post-tensioned roof & floor features. Manufactured locally throughout North America.

Durable

Impact resistant: upgraded post-tensioned design increases average compressive strengths by 28% and increases distribution of radial compressive forces by 33%.
Weather-tight: see below.
Maintenance free: will not rust, warp, corrode, rot or burn and retains finish without maintenance.
Heavy-duty construction: galvanized insulated doors, deluxe door hardware and extruded aluminum threshold with integral seal.

Standard sizes: 10’ x 12’, 12’ x 16’, and 12’ x 20’ (exterior dimensions) with Easi-Set transportable custom designs and sizes available.
Exterior-finish choices: many options offered to blend with surrounding architecture.
Unlimited optional features: buildings can be provided with tapered or gabled roofs and outfitted as required.

Vandal resistant: steel-reinforced precast concrete construction, tamper-proof hinges, dead bolt locks and steel doors.
Bullet resistant: UL 752 —Level 4 bullet resistant.
Fire resistant: standard fire rating of 1.5 hours, additional protection available.
Earthquake resistant: rated Seismic Zone 4.
Hurricane resistant: standard withstand up to 150 mph wind loads.
Blast resistant: can withstand petrochemical blasts.

Turn-Down Roof: Prefabricated turn-down roof can be provided with an architectural ribbed edge. This design protects the roof joint from direct exposure to driving rain and provides a drip edge to prevent moisture penetration.
Above-Door Rain Guard: Drip edge protection.
Galvanized Door &Frame: Specially reinforced for high quality with mechanical hold-open arm.
Raised Aluminum Threshold: Extruded aluminum threshold with integral neoprene seal provides unsurpassed moisture, dust and pest resistance.
Step-Down Floor: Perimeter of floor is recessed so that the wall joint is below top of floor.
Improved Radial Post-Tension Design: Provides superior water-tight construction.

Gets your site operational fast: quick installation and simple site preparation. With built-in floor, no foundations are necessary unless required by local codes. Buildings are delivered pre-assembled, with or without a floor, or placed on a crushed stone base or a pre-poured concrete slab.
Reduces maintenance expenses: durable and vandal resistant with lifetime finishes.
Saves money: costs much less than comparable site built construction.
Relocatable: can be moved when needs change.
Pre-engineered: sealed calculations and drawings in hard copy or electronic format.